User manual for gold's gym stride trainer 300. Designed to be extremely user-friendly, FANUC’s new iHMI makes operating CNC machines easy and efficient. The new panel is flat, features ergonomically positioned keys, completely redesigned hardware and a brand new user interface.
To support seamless integration into existing machine concepts, it shares the same dimensions as other FANUC interfaces, allowing users to retain existing keypads and to switch easily from old to new hardware. Despite its redesigned look and more intuitive layout, FANUC users will find it provides a familiar user experience. For maximum machine uptime, iHMI comes with new maintenance and data logger functions required for IoT and smart factories. The CNC series 0 i model F provides the ideal basic solution for multiple control applications.
Ready to use, it boasts latest generation hardware and a complete package of standard software. To maximise productivity on more specific applications, it can be easily customised using a range of additional functions. Combining unbeatable value for money with unrivalled performance and reliability, it includes features and functions usually associated with high performance systems.
Key features:. up to 12 axes, 6 spindle axes and 2 paths. up to 2 additional loader paths. 4-axis simultaneous and 3+2 axis machining. ready to use with integrated software package. excellent performance-to-cost ratio. integrated FANUC Dual Check Safety function.
shop-floor programming via MANUAL GUIDE i or TURN MATE i. additional functions for simple customisation. integrated high-speed PMC.
high speed and high quality machining package. maximum look-ahead blocks 400. common operability, maintainability, network and PMC function with CNC Series 30 i-MODEL B. FANUC Series 30i / 31i / 32i-model B controls are ideally suited to complex high-speed, precision machines equipped with multiple axes and multi-path functionalities. To meet the needs of various types of user, 30i / 31i / 32i-model B controls combine user-friendly operation with exceptional levels of accuracy, reliability and efficiency across every perceivable kind of machine tool, including multi-axis lathes, 5-axis machining centres, gear cutting machines or transfer machines. Key features:. up to 96 axes, 24 spindle axes and 15 paths.
What Is A Series 31 License
5-axis machining. compound mill / turn or turn / mill machining. extended integrated preventive maintenance functions. integrated FANUC Dual Check Safety function.
shop-floor programming via MANUAL GUIDE i. collision control via 3D Interference Check. Vr2500 engine manual. dynamic compensation functions for highest accuracy. High-Speed Smooth Tool Center Point 5-Axis Compensation. Learning Control / High-Speed-Cycle-Machining.
integrated high-speed PMC. high speed cutting. iHMI offering intuitive and extremely user friendly operation. The FANUC series 35i-MODEL B control is primarily designed for transfer lines, gantries or multiple milling and drilling stations.
More capable and robust than a PLC-based motion system, it supports the widest range of industry standard protocols including Ethernet/IP, ProfiNet and DeviceNet. 100-MBit Ethernet integration translates into low cost system interconnectivity, high-speed part program transfers, data collection and troubleshooting from remote locations. Additional software options enable fast high-precision multi-path processing and provide you with the freedom to develop unique bespoke solutions of your own. To reduce cycle times up to five independent 9.1 nanosecond-per-step PMC ladders execute simultaneously, eliminating the cost and complexity of external PLCs in many applications. Key features:. up to 20 axes, 4 spindle axes and 4 paths.
Series 65
ready to use with integrated software package. simple axis setup. additional functions for simple customisation. up to five integrated high speed PMCs. The FANUC CNC Power Motion i-A is the ideal high response CNC for efficient high performance motion control and a wide range of industrial machining applications.
With capabilities including multi-axis and multi-path functionality for position, speed and torque control, it makes the ideal solution for press machines, loaders, stamping machines, wire saw, winding and filling machines to name but a few. High-level motion path programming is very straightforward, with the programming system enabling fast, low-cost application development. Integrated motion specific architecture translates into very competitive hardware costs for multi-axis applications. A wide variety of screens are also available for easy setup, operation and maintenance, as is screen sharing. Key features:. up to 32 axes and 4 paths. ready to use and includes an integrated software package.
integrated FANUC Dual Check Safety function. additional functions for simple customisation. integrated high-speed PMC. CAM function. perfect combination of pressure and position control.
This section describes the safety precautions related to the use of CNC units. It is essential that these precautions be observed by users to ensure the safe operation of machines equipped with a CNC unit (all descriptions in this section assume this configuration). Note that some precautions are related only to specific functions, and thus may not be applicable to certain CNC units. Users must also observe the safety precautions related to the machine, as described in the relevant manual supplied by the machine tool builder.
Before attempting to operate the machine or create a program to control the operation of the machine, the operator must become fully familiar with the contents of this manual and relevant manual supplied by the machine tool builder. CONTENTS DEFINITION OF WARNING, CAUTION, AND NOTE.s-1 GENERAL WARNING S AND CAUTIONS.s-2 WARNINGS AND CAUTION S RELATED TO PROGRAMM ING. S-3 WARNINGS AN D CAUTIONS RELATED TO HAND LING.s-5 WARNINGS REL ATED TO DAILY MAI NTENANCE.
Number of path: 10 - 15 path Max. Total number of control axes: 96 axes (72 feed axes, 24 spindles) / 10 path 72 axes (56 feed axes, 16 spindles) / 15 path Max. Number of simultaneous control axes: 24 axes The big capability of this model helps to realize an advanced multi axis machine tool. Thanks to a number of control axes, various machining processes can be executed at the same time. Its 5-axis machining function can achieve the machining of complex shape. It has the flexibility to control various types of machine tools.
Communication with Ethernet Board Ethernet version is realized by the socket communication (TCP/IP communication) with FANUC Ethernet Board, or FANUC Fast Ethernet Board. And in case of Series 16i/18i/21i-MODEL B and Series 30i/31i/32i-MODEL A, Ethernet version can communicate with CNC side by the 'Embedded Ethernet function'. Before using, refer to the necessary manual, and confirm the following items.
Settings of TCP/IP in your personal computer side. Settings of the Ethernet Board and Embedded Ethernet function in the CNC side. Physical network connection between your personal computer and the CNC.
The number of the application software(clients) that can connect to one CNC at the same time depends on the type of Ethernet interface as follows. Fast Ethernet Board Ethernet Board Note 1) Embedded Ethernet Clients at the same time maximum 20 maximum 10 maximum 5 PCs at the same time maximum 20 maximum 10 1 (recommended) Note 1) Maximum 3, in case of 6561/03, or 6561/04(for Series 16i/18i/21i, Power Mate i). Series 30i/31i/32i-A does not support the Ethernet board.
See the manual 'APPENDIX D RESTRICTIONS' in 'FANUC Ethernet Board/DATA SERVER Board OPERATOR'S MANUAL (B-63354EN)', 'FANUC FAST Ethernet Board/FAST DATA SERVER OPERATOR'S MANUAL (B-63644EN)' for details. The communication using the Embedded Ethernet is processed on the CNC CPU. This means that the running condition of CNC may affect the communication performance of the Embedded Ethernet, and conversely, the communication condition of the Embedded Ethernet may affect the process of CNC. The Embedded Ethernet function is processed at lower priority than the process such as the automatic operation, or each axis process at the manual operation.
Therefore, during the automatic operation, or in case that the CNC is configured so as to have many controlled axes, the communication speed may be slow. The other way, the Embedded Ethernet function is processed at higher priority than the process such as screen display process of CNC, C-language executor(except the high level task), macro executor(except the execution macro). Therefore, the performance of these processes may go down by doing the communication of the Embedded Ethernet. The following Ethernet applications cannot be used because the adequate performance may not be acquired by the above reasons.
CNC Screen Display Function. Application for the DNC operation. In case that the Embedded Ethernet is connected to the Intranet that uses many broadcast data, it may take a long time to process the broadcast data. So, it may affect the performance of the process such as screen display of CNC. Modified: 2018-06-10.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |